BRIGHT CHROME NEUTRALIZER 306
BRIGHT CHROME NEUTRALISER – 306 AFFORDS A SIMPLE METHOD FOR REMOVING THE CHROME SOLUTION CARRIED OVER ON PLATED COMPONENTS. AS THEY ARE TRANSFERRED FROM THE DRAG-OUT TANK AFTER CHROME PLATING. IN USE, IT NOT ONLYNEUTRALISES ANY FREE ACID REMAINING UPON THE SURFACE OF THE CHROME PLATED ARTICLES, BUT ALSO CHEMICALLY REDUCES THE RESIDUAL CHROME TO EASILY REMOVABLE AND WASHABLE FREEN TRIVALENT CHROME.
THE BRIGHT CHROME NEUTRALISER – 306 CAN ALSO BE USED, VERY EFFECTIVELY ON AUTOMATIC NICKEL AND CHROME PLATING PLANT FOR THE REMOVAL OF ANY CHROMIC ACID ENTERAPPED IN JIGS, THUS PREVENTING CHROMIC CONTAMINATION OF THE CLEANING LINES.
WORKING INSTRUCTIONS
| CONCENTRATION | 100 GMS/ LIT OF BRIGHT CHROM NEUTRALISER – 306 INITIALLY & 3 GRM/ LIT TWICE DAILY OR AS PER THE NEED. MAKE FRESH EVERY WEEK. |
| PREPERATION | FILL UP THE TANK WITH WATER UP TO TWO THIRD OF ITS CAPACITY. DISSOLVE THENEUTRALISER 306 IN REQUIRED PROPORTION, IN WARM WATER AND WHEN COMPLETEL DISSOLVED POUR IT IN TO THE TANK ADJUST THE WORKING LEVEL. |
| TANK | MILD STEEL, OR HDP PLASTICS. |
| OPERATION | PLATED COMPONENTS FROM THE DRAG-OUT TANK AFTER CHROMIUM PLATING ARE SIMPLY IMMERSED IN TO THE BRIGHT CHROME NEUTRALISER – 306 SOLUTION FOR 2- 60 SECONDS AT ROOM TEMPRATURE. THE COMPONENTS ARE FINALLY WELL RINSED IN COLD RUNNING WATER AND THEN PUT THROUGH HOT WATER TO FACILITATE DRYING. |
| SEQUENCE OF OPERATION | THE FOLLOWING PROCESS SEQUENCE IS ADVISED:1) BRIGHT CHROMIUM PLATE
2) DRAG- OUT 3) BRIGHT CHROME NEUTRALISER – 306 DIP 4) RUNNING WATER SWILL 5) HOT WATER SWIL 6) DRY OUT |
| MAINTENANCE | TO MAINTAIN THE EFFECTIVENESS OF THE DIP REGULAR ADDITIONS TO TH EEXTENT OF 3 GM/ LIT OF THENUETRALISER – 306 ARE MADE TWICE DAILY. THESE ADDITIONS ARE PREFERRABL MADE AT THE BEGINNING OF THE MORNING AND AFTERNOON SHIFTS. MAKE FRESH EVERY WEEK. |